NIM Paster /Venetian Stucco
It’s high quality water-borne decorative topcoat paint, based on a unique emulsion with smart combination of fillers and fine aggregates to provide elegant, modern, stone and marble designs
Recommended use:
- Recommended to use for interior applications on concrete, cement, and gypsum surfaces where luxury decorative look is required .for palaces, offices, hotels, airports lounges, reception rooms, modern houses entrances etc.
Drying time:
- Full surface dry =(25-40)minutes
- Hard dry =(2-3)hours
- Full cure. =7 days
Application tools
- Putty knife
- Stiff plastic brush
- Plastic trowel
- Plastic scarper
- Special knife
Thinner:
- Ready to use
Painting system
- Apply one coat of Nim undercoat.
- Apply two coats of Nim plaster putty.
- Apply two coats of Nim primer according to the same color of the Nim turmali.
- Apply one coat of Nim turmali using a putty knife, and then form the following shapes within (5 minutes).
To obtain lines and shapes.
- Apply the product while using a special stiff plastic brush in a uniform transverse form.
- Refine the surface using a plastic trowel in the same direction.
- Leave the product for a proper dry, then start polishing using a plastic knife.
To obtain travertine shapes.
- Apply the product using a special stiff plastic brush in an intermitted transverse form .
- Leave the product for a proper dry, then start removing protrusions using a plastic knife.
- Polish using a special knife.